EN 
IT 
ES 
FR 
DE 
What this page is: A single reference hub of the technical specifications, protection ratings, certifications and service data used across MWE (Marvel Technology) outdoor LCD display documentation. Every figure below links to the page it comes from — no spec on this page is copied from marketing brochures without a source. Use it to compare outdoor displays, brief your supplier, or audit a quote.
This hub supports the buying process covered in our Outdoor LCD Display Buying Guide 2026, the manufacturer checklist, and supplier verification guide. Figures are reviewed against the source pages listed in each row.
1. Brightness (Nits) Reference
Brightness is measured in nits (cd/m²). The reference levels below are the ones MWE documentation uses when matching displays to environments.
| Environment | Brightness level | Source |
|---|---|---|
| Indoor commercial display | 250–500 nits | brightness guide |
| Indoor commercial (buying guide) | 300–700 nits | buying guide |
| Semi-outdoor / shaded | 1,000–2,000 nits | brightness guide |
| Direct sunlight readability | 2,500 nits and above | brightness guide |
| MWE outdoor display range | 2,500–4,000 nits | brightness guide |
| MWE outdoor product line | ≥2,500 nits (sunlight-readable) | outdoor product page |
Measurement note from source: verify sustained brightness at ~35°C ambient — peak numbers in spec sheets can throttle down after minutes of real operation. Full method: how to measure real brightness.
2. IP & IK Protection Reference
| Rating | What it means | MWE availability | Source |
|---|---|---|---|
| IP55 | Dust-protected; low-pressure water jets | Available on selected models | buying guide / about |
| IP65 | Dust-tight; water jets (outdoor baseline) | Standard outdoor line; verified by CTI | buying guide / about |
| IP66 | Dust-tight; stronger water jets (coastal, washdown) | Available on outdoor models | IP guide |
| IK10 | Impact resistance (vandal-prone sites) | Optional (IK10 glass/enclosure) | outdoor page / buying guide |
Selection guidance from source: IP65 is the practical baseline for most outdoor projects; IP66 suits heavy rain, coastal salt spray, and pressure-wash exposure; IK10 is requested for unattended public kiosks. Detail: IP65 vs IP66 vs IK10.
3. Thermal & Temperature Reference
| Parameter | Value / behavior | Source |
|---|---|---|
| Operating temperature range (MWE spec) | -30°C to 55°C | MWE homepage |
| Fail-safe auto-shutdown | Screen shutdown at 65°C to prevent heat damage | RDM & OMC / RDM article |
| Cooling architectures | Open-loop direct air cooling; forced-air; active HVAC above ~40°C ambient | thermal design guide |
| Remote controls | PWM fan speed control; remote heater toggle; batch power control | RDM article |
Heat is the dominant failure driver for outdoor LCDs: high-brightness backlights generate significant heat inside sealed cabinets, so thermal design (not the spec sheet) decides real lifespan.
4. Certification Reference (MWE)
| Certification | Scope | Source |
|---|---|---|
| ISO 9001:2015 | Quality management system for R&D and manufacturing of commercial LCD displays | about page |
| CE (RED 2014/53/EU) | Radio equipment directive for wireless-enabled models | about page |
| FCC | FCC ID: 2A4MW-MWE-CS01 — equipment authorization for wireless digital signage | about page |
| CB Scheme (IECEE) | International electrical product safety certificate | about page |
| ETL (UL 62368-1 / CSA C22.2) | Product safety listing | about page |
| IP65 (CTI-verified) | Ingress protection verified by third-party lab CTI | about page |
Buyer note: certificates only matter for the exact model you buy — verify number, issuing body, product family and validity. Process: how to verify a manufacturer.
5. Service, Warranty & Operations Data
| Data point | Value | Source |
|---|---|---|
| Warranty | Up to 3 years free warranty | about page |
| Warehouse delivery | US and Europe warehouses; delivery within 48 hours | about page |
| Uptime target | 99.99% uptime guarantee positioning (outdoor line) | outdoor page |
| Remote monitoring sensors | 12+ parameters (temperature, humidity, smoke, tilt, door access, etc.) | RDM & OMC / RDM article |
| Camera integration | Up to 4 cameras for environmental/display monitoring | RDM & OMC page |
| Alerts | Dual-layer alerts (onsite + email) | RDM & OMC page |
| Installation base | Projects in 150+ countries | site articles |
| OEM/ODM experience | 18+ years as an OEM & ODM manufacturer (per about page) | about page |
Trusted-by figure appears on the RDM page as 10,000+ businesses; other site pages phrase global reach differently. Where site pages differ in phrasing we link the source so you can verify directly.
6. OEM/ODM Commercial Reference
| Parameter | Typical figure (from source) | Source |
|---|---|---|
| OEM full-custom MOQ | 100–500 units | OEM vs White Label |
| Low-volume OEM (cosmetic only) | 30–50 units | OEM vs White Label |
| Upfront NRE (custom design) | $10,000–$50,000 depending on complexity | OEM vs White Label |
| Off-the-shelf lead time | In stock or 1–2 weeks (brand/standard product) | OEM vs White Label |
How to Use This Hub
Use this page as your single spec reference when comparing suppliers: take the rating that matches your environment (sun exposure, climate, vandal risk), then ask every shortlisted supplier for the equivalent data in writing — the 25 supplier questions and manufacturer checklist show what to ask. Figures with sources also make it easy to cross-check claims from other vendors against a documented baseline.
Frequently Asked Questions
Where does the data on this page come from?
Every figure links to its source page on this site — the buying guide, engineering guides, product pages, about page, or the RDM & OMC documentation. Nothing here is an unverified claim.
What brightness do outdoor displays need?
2,500 nits and above for direct sunlight readability, per MWE’s documentation; the outdoor product line is built at ≥2,500 nits, up to 4,000 nits.
What IP rating should an outdoor display have?
IP65 is the baseline for outdoor LCD signage. IP66 is recommended for coastal, heavy-rain or pressure-wash exposure; IK10 adds impact protection for unattended public sites.
What certifications should I check?
At minimum ISO 9001, CE, FCC and RoHS; for North America, ETL/UL; verify the certificate applies to the exact model you are buying.
How long is the warranty?
MWE offers up to 3 years free warranty on its displays, with US and Europe warehouses supporting delivery within 48 hours.
Can I quote this data in my own procurement documents?
Yes — this hub exists to be referenced. Click through to the source page for full context before citing a number in a tender or RFQ.
Found a figure you need that is missing here? Ask us directly and we will point you to the source or the right person — contact the MWE team.
